Skip to content

Free delivery on our Impera Italia colour charts and sample pots!

Shop Here
Search 0 Open cart dialog
Microcement Sealers
  • Protego Component A - Extra Durable, Hard Wearing Resin Sealer In Selected Sheen Level (Requires Protego Component B)

Protego Component A Extra Durable, Hard Wearing Resin Sealer In Selected Sheen Level (Requires Protego Component B)

Regular price From £108.00

Protego is the next generation of Resin sealers for our Microcement Products. Component A is the main ingredient, as it determines the final sheen of the application. This can be Matt, Satin or Gloss. The component B is generic and is the same regardless of which component A is used. This sealer is made up of an A + B component, with water being added on top, similar to the Link component.  The ratio for Mixing up Protego is: 5 parts Component A + 1 parts Component B. Once these have been mixed, the sealer is ready to use, although up to 5% water can be added if desired to help with spreadability.

Purchasing one of our complete coating systems with this sealer will provide a significant discount over purchasing this sealer individually. These have been made available to purchase separately for specific circumstances where only one component is needed.

  • Highly Durable Sealer For Microcement Coatings
  • Matt, Satin or Gloss Options
  • Designed For High Traffic Areas
  • Requires Component B
5

Specifications

Coverage:

  • Approximately 2kg per 10sqm (2 coats). This is made up of 1.67kg of Component A and 0.33kg of Component B.

Number of coats:

  • 2 coats.

Dilution:

  • No dilution, instead the following mixture should be created (based on a 10sqm kit). 1.67kg of Component A and 0.33kg of Component B. 5% water can be added if desired to help with spreadability (100ml). This is for 10sqm.

  • The preparation ratio for Protego is:

Component A 5 : 1 Component B.

Tools:

  • Foam roller.
  • Mixing blade.

Storage:

  • Between +5C and +35C for up to 2 years.

Disclaimers

  • Using the Protego sealer is likely to slightly shift the colour of the plaster. The exact amount depends on the colour being used.

  • Protego should be applied in at least 2 coats. The more coats the better. It is also recommended to do multiple thin coats, allowing adequate drying time in between, than try to do less, thicker coats.

  • Any showers or floors should not be used for 48 hours after application. Light traffic is okay for the first 5 days, but no furniture should be placed on the surface until after 7 days. The Maximum hardness is achieved after 21 days.

Need Help?

The Nitty Gritty

Features & Benefits

Discover:

You May Also Like