Skip to content

Please note, any orders placed after the 18th of December will be dispatched from January 6th onwards.

Search 0 Open cart dialog
Individual System Components
  • Continuo Link Component A - Pre-sealer For Microcement System (Requires Link Component B)

Continuo Link Component A Pre-sealer For Microcement System (Requires Link Component B)

Regular price From £18.60

Link Component A is the first part, of this bi-component pre-sealer. The role of the Link, is to fill the pores of the plaster and seal them for durability. The application of the Link is done in a single coat, that will significantly darken the Decorative plaster. For this reason, the Link should be applied to any sample that is done, as only after the link dries, the final colour of the finish will be determined. Please note that in order to apply Link Component A, you will need to correct proportion of Link Component B. This is mixed in a ration of 2 parts Component A to 1 part Component B.

Purchasing the complete Continuo Microcement System will provide a significant discount over purchasing individual components. These have been made available to purchase separately for specific circumstances where only one component is needed.

  • Pre-Sealer For Continuo Microcement
  • Darkens The colour of the plaster
  • Penetrates and seals the pores of material
  • 2 part mixture for mixing with water
5

Specifications

Coverage:

  • Approximately 750ml per 10sqm (1 coat). This is made up of 100ml of Link Component A, 50ml of Link Component B and 600ml of Water.

Number of coats:

  • 1 coat.

Dilution:

  • No dilution, instead the following mixture should be created (based on a 10sqm kit). 100ml of Component A, 50ml of Component B, 600ml of water.
  • The preparation ratio for Link is:

Link A 2: 1 Link B. The total volume is multiplied by 4 and this is how much water should be added.

So 100ml of Link A + 50ml of Link B is 150ml of solution. This 150 is now x4 to make 600. (This is the amount of water to add). This formula can be adjusted for any amount of link that is to be prepared.

Tools:

  • Foam roller.
  • Mixing blade.

Storage:

  • Between +5C and +35C for up to 2 years.

Disclaimers

  • Please note that Continuo Link Component A must be mixed with Component B, and the correct amount of water must be added before being applied.
  • The colour of the plaster used for the project is unlikely to match the final look. This is because the addition of the Link pre-sealer will darken the colour. Therefore, any time samples are being made, Link should be applied before judging the colour.

Need Help?

The Nitty Gritty

Features & Benefits

Discover:

You May Also Like