ALLOVER Textured Floor & Wall System
The ALLOVER Textured Floor & Wall kit is a multi-layer, decorative system designed for floors and walls. It is suitable for use in residential projects, such as living spaces, bathrooms, kitchens areas. Additionally, it can be used to decorate furniture elements.
It involves the application of ready-to-use single-component paste products, which are composed of a unique acryl-silane polymer and various types of reinforcing fibers. This specific composition enables the ALLOVER cycles to be applied without the need for a fiberglass-stabilizing mesh in most cases.
ALLOVER focuses on creating cosy and harmonious spaces by offering modern, customized finishes that stay up-to-date with current interior design trends. This combination of customization and trend awareness can contribute to the creation of inviting and comfortable environments.
One of the advantages of the ALLOVER system is that it can easily be applied directly on-site, without any previous preparation in most cases. It can be applied to different surfaces, including concrete surfaces and old ceramic walls. Please bear in mind that if the surface is not absorptive at all then you should use Pro Link as a primer.
ALLOVER is not recommended for outdoor areas, areas adjacent to swimming pools, and areas used for car parking.
Overall, the ALLOVER system is designed to provide a good compromise between ease of installation, technical performance, and aesthetic results, making it an appealing option for various decorative and functional applications in suitable environments.
If you’d like to test our ALLOVER microcement, please check out our ALLOVER Sample kit (average coverage of 1 sqm).
Tools for ALLOVER
To create an outstanding look with our ALLOVER Textured Floor & Wall Kit, you will need a Venetian plastering trowel, and putty knife (various sizes).
To apply the ALLOVER Top, you can use a gloss pile roller.
Why Use ALLOVER
The distinctive advantages of the ALLOVER system:
- You will purchase from the most established UK retailer of Italian decorative specialist finishes, based in London.
- You will have original, hand-applied, and durable wall coating that lasts.
- You’ll have a complete ALLOVER system for every 10 sqm with colourants already added (no measuring is needed, colour accuracy is high), with a two-year shelf life.
- You’ll use an approved ALLOVER system from the largest decorative products specialist producer in Italy.
- You can complete projects in only three to five days depending on which kit you purchase. (scope of works, preparation, complexity of work, and working place conditions can extend this time frame significantly)
- You can apply it on top of underfloor heating (see more details in the manual), cover furniture, and create durable and waterproof bathroom finishes
- You will have our technical support before and after purchase. Technical training can be also provided.
- You can purchase only a 1 sqm kit for sampling or patching
Apart from enhancing contemporary residences and commercial spaces with ALLOVER finishes, you can coat over pre-existing tiled surfaces such as porcelain tiles, mosaics, natural and engineered stone, as well as other coatings like epoxy or polyurethane resins, among various others, to change their overall look.
The 10 sqm kit includes the following products
Atomo | Surface Stabilizer | 1L |
Continuo Base | Base coat | 25Kg |
Fiberglass Mesh | For the base coat | 12 Sqm |
ALLOVER Base | Base Coat | 15Kg |
ALLOVER TOP | Protector | 1.25L |
Don’t forget to purchase PRO LINK separately for non-absorbent surfaces as it’s not included in the kit!
If you want, you can sand each plastering coat. Please note that this is optional!
BEADING
Please be aware that corner beads, stop beads, and reveal beads are not included in the Kit.
All beads require extra material (Continuo Base) for installation. Please refer to the consumption rate below.
CONTINUO BASE WET MATERIAL PREPARATION
STOP BEAD
270 gr per lineameter
650 gr per full-length bead 2.4m
1 bag of Continuo Base 25 Kg + 6L of water will do 48 STOP BEADS
REVEAL BEAD
270 gr per lineameter
650 gr per full-length bead 2.4m
1 bag of Continuo Base 25 Kg + 6L of water will do 48 REVEAL BEADS
CORNER BEAD
570 gr per lineameter
1360 gr per full-length bead 2.4m
1 bag of Continuo Base 25 Kg + 6L of water will do 32 CORNER BEADS
How to Apply ALLOVER
The application method is simple and straightforward, you should apply one coat after the previous one is dry enough. Please see the below table for further details:
Step | Product | Layer | When? | Tool | Diluted / Mixed |
1 | Atomo | One coat | Create a bonding coat on porous OR non-absorptive surfaces | Roller or brush | Should be diluted 30%; 300 ml of water to 1L of Atomo. Pro-Link doesn’t need to be diluted. |
2 | Continuo Base | One of Two | Create a bonding coat on porous OR non-absorptive surfaces | Stainless Steel Trowel | Mixed with water; 5-6L to 25Kg. |
3 | Fibreglass Mesh | Directly Embed in the first coat of ALL Base | |||
4 | Continuo Base | Second of Two | 4 hours after step 2 | Stainless Steel Trowel | |
5 | ALLOVER Base | Only one coat | 4-6 hours | Stainless steel | Ready to use. |
5.1 | Sand the coat of ALLOVER Base using 80 grit sandpaper | ||||
6 | ALLOVER Top | Only one coat | At least 4 hours after step 2 | Roller | Dilute with 0-15% of water |
7 | ALLOVER Top | Two of two | At least 3 hours after step 6 | Roller | 0-15% with water |
Light traffic | 24 hours after step 7 | ||||
Fully usable | 5 days after step 7 |